Residential · Lakewood, CO
A durable asphalt walkway starts with correct grading and a stable base, not just a fresh topcoat. Apex Asphalt Lakewood has served Lakewood since 2019, installing and repairing asphalt walkways and paths for homes, HOAs, and commercial sites with clean edges, proper drainage, and long-lasting compaction.
Prep and base work make or break an asphalt walkway. We start by staking the path width, checking slope for drainage, removing failed asphalt or soft soils, and grading the subgrade to a uniform plane. Next we install a compacted aggregate base, typically 4-6 inches of Class 6 road base (or 6-8 inches where soils are weaker), placed in lifts and compacted with a plate compactor or small roller to reduce future settlement. For edges that need extra strength, we add an edge restraint, compact the shoulder, and set transitions to existing concrete, steps, or driveway asphalt so there is no trip lip.
Lakewood’s freeze-thaw cycles and spring runoff punish walkways that hold water or have thin spots. We build cross-slope and pitch to shed water, then place hot mix asphalt (HMA) at the right temperature and thickness, commonly 2 inches compacted for pedestrian paths and thicker at aprons or cart areas. Seam quality matters on narrow paths, so we plan truck access, use luting rakes and hand tools where a paver cannot fit, and compact immediately with a walk-behind roller for tight density. Finish options include a clean sawcut edge against concrete, tapered tie-ins, and a smooth, walkable surface that drains instead of puddling.
Customers in Lakewood choose us because we treat small paving jobs with the same standards as parking lots. You get a licensed and insured asphalt contractor that shows up with the right equipment, protects landscaping, and keeps the site safe with clear barricades and clean work zones. We provide a clear written estimate with base thickness, asphalt depth, and scope details, and we recommend repairs that make sense, including infrared patching for localized failures, crack sealing with hot rubberized material, or full remove-and-replace where the base has failed. The goal is a walkway that stays even, drains correctly, and holds up to foot traffic, bikes, strollers, and maintenance carts.
Before we wrap up, we walk the asphalt walkway with you and verify drainage, transitions, and edges. You get clean tie-ins to existing pavement, a swept site, and straightforward guidance on cure time, typically light foot traffic after 24 hours and heavier loads after the mix cools and firms up. If the project includes crack sealing, patching, or sealcoating, we explain timing so you do not trap moisture under a sealer too soon. The result is a neat, safe path with defined edges, proper thickness, and a base built to resist rutting and frost movement.
Yes. We provide a free written estimate that lists the scope, materials (hot-mix asphalt, tack coat, crack sealant, sealcoat), and an expected schedule.
Light foot traffic is often possible the same day, and vehicle traffic is typically allowed after the asphalt cools and gains initial stability. We give site-specific guidance based on thickness, temperature, and turning movements.
Often, yes. We can do targeted repairs like saw-cut remove and replace, full-depth patching, or infrared patching, then blend the repairs into a maintenance plan such as crack filling and sealcoating.
Yes. We can restripe after paving or sealcoating, including stall lines, fire lanes, directional arrows, and accessible markings, based on your layout and requirements.
Prep typically includes demolition or milling if needed, grading for drainage, compacting aggregate base, addressing soft spots, applying tack coat where new asphalt meets existing pavement, and compacting hot-mix with vibratory rollers for density.
An asphalt walkway is one of the best ways to connect driveways, patios, entrances, and outbuildings with a smooth, low-maintenance surface. For homeowners, it reduces muddy footpaths and trip hazards. For businesses and HOAs, it improves site safety and appearance while staying cost-effective compared to many hardscape options. Apex Asphalt Lakewood installs new asphalt walkways and repairs failing paths using hot mix asphalt, proper base construction, and consistent compaction so the pavement performs through Colorado’s freeze-thaw swings.
Most asphalt walkway failures start below the surface. If the subgrade is soft, the base is too thin, or water cannot drain away, the path will settle, crack, and become uneven. Our process focuses on excavation as needed, grading for runoff, and installing an aggregate base in compacted lifts. Then we place and compact HMA to a consistent depth, paying close attention to seams, edges, and tie-ins where narrow paths often fail first.
Need repair instead of replacement? We evaluate whether the issue is surface aging, isolated damage, or base failure. For surface cracking, we can clean and fill with hot rubberized crack sealant to reduce water intrusion. For potholes and depressions, we sawcut, remove the failed section, rebuild the base, and patch with hot mix asphalt, then compact to match surrounding grade. Where practical, infrared asphalt repair can reheat and blend sections to minimize seams.
A well-built asphalt walkway should feel smooth underfoot, drain after storms, and stay stable across seasons. If you are planning a new path or want to fix an uneven or cracked walkway, we will provide a free written estimate and a clear plan for prep, base, paving, and cure time so you know exactly what you are getting.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Lakewood. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
